Manual.ly Logo

Webasto Pure Kayttoohje

0,0 · 0 Arviot

PDF-käyttöopas · 66 Sivua

Suomi

M: QW-35-FL
sivu

/ 66

Loading...
e960bb56323879fb72c33dcf0aaadd4134da page 3
Webasto Pure 3
1 General information
1.1 Purpose of the document
These operating and installation instructions are part of the
product and contain information for the user to ensure safe
operation and for the authorised electrician to carry out
safe installation of the Webasto Pure charging station.
1.2 Using this document
Carefully read the operating and installation instructions
before installing and starting up the Webasto Pure.
Keep these instructions ready to hand.
Hand these instructions on to the following owner or
user of the charging station.
1.3 Intended use
The Webasto Pure charging station is designed for charging
electric vehicles in accordance with IEC 61851-1, charge
mode 3. In this charge mode, the charging station ensures:
■■
The voltage is not applied before the vehicle has been
connected correctly.
■■
The maximum power is calibrated.
The AC/DC converter is in the vehicle.
1.4 Use of symbols and highlighting
DANGER
Hazard with a high degree of risk which, if not avoi-
ded, will lead to death or serious injury.
WARNING
Hazard with a moderate degree of risk which, if not
avoided, may lead to minor or moderate injury.
CAUTION
Hazard with a low degree of risk which, if not avoi-
ded, will lead to minor or moderate injury.
The note denotes a special technical feature or
potential damage to the product.
Reference to separate documentation
Description of a precondition
Description of an action
1.5 Warranty and liability
Webasto shall not accept liability for defects or dama-
ge due to the failure to comply with the operating and
installation instructions. This liability exclusion particularly
applies to:
■■
Improper use.
■■
Installation and initial operation by a non-authorised
electrician.
■■
Repairs not carried out by a Webasto service workshop.
■■
Use of non-original spare parts.
■■
Conversion of the unit without permission from
Webasto.
2 Safety
2.1 General information
Only persons over the age of 18 are permitted to use the
charging station.
The Webasto Pure charging station has been developed,
produced, tested and documented according to the
relevant safety regulations and environmental requirements.
The device must only be used in a technically faultless
condition.
Have any faults that adversely affect the safety of persons
or of the device rectified immediately by an authorised elec-
trician in accordance with nationally applicable regulations.
It is possible that the signalling in the vehicle differs
from that described here. Always read the operating
instructions of the respective vehicle manufacturer
and always observe these.
2.2 General safety information
■■
Hazardous voltages are present within the casing.
■■
Check charging station for visual damage before
use. Do not use the charging station if damaged.
■■
Installation, electrical connection and initial ope-
ration of the charging station must only be carried
out by an authorised electrician.
■■
Do not remove the cover of the installation area
whilst in operation.
■■
Do not remove markings, warning symbols and
the rating plate from the charging station.
■■
The charging cable must only be replaced by an
authorised electrician in accordance with the
installation instructions.
■■
It is strictly prohibited to connect other equip-
ment/devices to the charging station.
■■
When not in use, store the charging cable in the
designated holder and lock the charging coupling
in the charging station. Loosely wind the charging
cable around the charger casing so that it does
not touch the ground.
■■
Make sure that the charging cable and coupling
cannot be driven over, trapped and are protected
from any other hazards.
■■
Immediately notify Webasto Customer Service
if the charging station, charging cable or the
charging coupling are damaged. Do not continue
using the charging station.
■■
The vehicle must be unoccupied during the char-
ging procedure.
■■
Prevent the charging cable and coupling from co-
ming in contact with external heat sources, water,
dirt and chemicals.
■■
Do not attach extension cables or adapters to the
charging cable.
■■
Remove the charging cable by pulling on the
charging coupling only.
■■
Never clean the charging station with a high-
pressure cleaner or similar device.
■■
Switch off electrical power when cleaning the
charging sockets in the charger coupling.

Keskustele Webasto Pure-käyttöoppaasi kanssa tekoälyn avulla

Saa välittömiä tekoälyvastauksia Webasto Pure-käyttöoppaastasi

Kysy mitä tahansa tuotteesta Webasto Pure. Vastaukset tulevat tästä ohjeesta, mukana sivut, joihin ne perustuvat.

Pure Huoltoaikataulu

Ennen jokaista käyttöä
Tarkista latausasema vaurioiden varalta

Tarkasta latausasema, kaapeli ja liitin näkyvien vaurioiden varalta ennen jokaista käyttökertaa. Älä käytä laitetta, jos se on vaurioitunut.

Tarvittaessa
Puhdista kotelo kuivalla liinalla

Pyyhi asennus vain kuivalla liinalla. Älä koskaan käytä painepesureita, aggressiivisia aineita, vahaa tai liuottimia.

M: qwen/qwen3.8-flash

Kysy kysymys

0/1000

Suositteletko Pure?

Kyllä Ei

Usein kysytyt kysymykset

A

Ei, asennus ja sähköliitäntä on suoritettava ehdottomasti valtuutetun sähköasentajan toimesta turvallisuuden ja paikallisten määräysten noudattamisen varmistamiseksi.

Onko tämä vastaus hyödyllinen?

A

Violetti LED viittaa siihen, että latausvirran raja on aktivoitu, yleensä rajoittaen syötön 20 A:han yksivaiheisissa latauskonfiguraatioissa.

Onko tämä vastaus hyödyllinen?

A

Paina kosketusohjauskytkintä ja pidä sitä painettuna vähintään 10 sekuntia käynnistääksesi järjestelmän itsestestauksen ja nollataksesi viat niiden korjaamisen jälkeen.

Onko tämä vastaus hyödyllinen?

A

Kyllä, sillä on IP54-luokitus, joka mahdollistaa käytön suojatuilla ulkoalueilla kuten autokatoksissa, mutta sitä ei saa altistaa suoraan sateelle tai korkeapainepesureille.

Onko tämä vastaus hyödyllinen?

A

Voit määrittää virran DIP-kytkimillä, mutta joillakin malleilla on tehtaalta asetetut rajat, joita ei voida ylittää, kuten 11 kW:n yksikön päivittäminen 22 kW:iin.

Onko tämä vastaus hyödyllinen?

M: QW-35-FL

Etuja ja Haittoja

Edut

  • Integroitu tasavirtaresiduurin seuranta parantaa turvallisuutta tasavirtaviroja vastaan
  • Tyylikäs musta pinta sopii saumattomasti moderneihin arkkitehtonisiin tyyleihin
  • DIP-kytkimet mahdollistavat joustavan konfiguroinnin 1-vaihe- tai 3-vaihejärjestelmille
  • IP54-suojausluokka varmistaa kestävyys pölyä ja vettä vastaan
  • Intuitiiviset LED-indikaattorit tarjoavat selkeät visuaaliset tilapäivitykset
VS

Haitat

  • Asennus vaatii sertifioidun sähköasentajan, mikä lisää alkuperäiskustannuksia
  • LED-varoitusväriä ei voi himmentää eri kuin seisokkivärit
  • Maksimiteho voi olla rajoitettu 20 A:han yksivaihekonfiguraatioissa oletuksena
  • Yksikköä ei voida päivittää 11 kW:sta 22 kW:iin ohjelmiston kautta tehdasasetusten jälkeen
  • Latauskaapelin vaihto on rajoitettu valtuutetuille ammattilaisille ainoastaan
M: QW-35-FL

Tuote Erittely

Latauspisteiden lukumäärä

1

Lataustila

IEC 61851-1 (Tila 3)

Vaiheiden lukumäärä

3-vaiheinen

Jännite

400 V (AC)

Liittimen tyyppi

Tyyppi 2

Yhteyden tyyppi

Kaapeli 4,5 m

Asennus

Seinään asennettava

Valtuutus

Avainkytkin

Suojaluokka

IP54

Mitat

22,5x44,7x11,6 cm (LeveysxKorkeussxDyysyys)

M: QW-35-FL

Tuotteen Kuvaus

Tutustu Webasto Pure Black Edition -oppaaseen

Webasto Pure Black Edition edustaa huippua sähköajoneuvojen lataustekniikassa, yhdistäen tyylikkään estetiikan ja vankan suorituskyvyn. Se on suunniteltu sekä asuin- että kaupallisiin ympäristöihin, ja tämä latausasema varmistaa turvallisen, tehokkaan ja luotettavan virtantoimituksen sähköajoneuvollesi. Oppas toimii kattavana oppaana laitteen täyden potentiaalin avaamiseen, tarjoten yksityiskohtaisia tietoja asennuksesta, käytöstä ja ylläpidosta ilman turhaa jargonia.

Toimien IEC 61851-1 -standardien tiukkojen turvallisuusparametrien puitteissa Webasto Pure käyttää edistynyttä lataustilaa 3 -tekniikkaa. Tämä varmistaa, että jännite kytketään vasta, kun ajoneuvo on kiinnitetty turvallisesti, suojaten sekä autoa että käyttäjää sähkövaaroilta. Laite sisältää intuitiivisen LED-indikaattorijärjestelmän, joka välittää tilan silmäyksellä, vaihtaen seisokista sinisestä aktiiviseksi vihreäksi ja virhetilanteessa punaiseksi. Joko määritettäessä sitä 1-vaiheiseen tai 3-vaiheiseen syöttöön DIP-kytkinasetukset mahdollistavat tarkan virran säädön jopa 22 kW:iin saakka.

Turvallisuus on ensisijaista Webasto Thermo & Comfort SE:n suunnittelufilosofiassa. Pure Black Edition sisältää integroidun tasavirtaresiduurin seurannan vaarallisten tasavirtavirojen estämiseksi. Asennus on suoritettava pätevän sähköasentajan toimesta, joka voi varmistaa asianmukaisen maadoituksen ja noudattaa paikallisia määräyksiä sulakkeista ja RCD-laitteista. Laite on rakennettu kestämään karuja olosuhteita IP54-luokituksella, mikä tekee siitä soveltuvan garageihin, autokatoksiin ja suojattuihin ulkoalueisiin samalla kun se vastustaa pölyä ja vesihanoja.

Vakion latauksen lisäksi Webasto Pure tarjoaa mukautettavia ominaisuuksia, jotka ovat saatavilla avainkytkimen kautta. Käyttäjät voivat siirtyä ohjelmointitilaan säätääkseen LED-kirkkautta tai poistaakseen 20 A:n latausvirran rajan tiettyjen mallien osalta, jos paikalliset lait sallivat sen. Sisällytetty kiinnityssarja helpottaa seinäasennusta, varmistaen, että laite pysyy vakaana ja turvallisena. Noudattamalla Webasto Pure Black Edition -oppaassa olevia ohjeita omistajat voivat nauttia saumattomasta latauskokemuksesta, joka priorisoi kestoikäisyyden, turvallisuuden ja tehokkuuden.

M: QW-35-FL

© Copyright 2026 Manual.ly